AOK-20L-1-CAN Full automatic blow molding machine

Go back

Equipment introduction

  • Use senior Mihana cost iron of clamping unit and moving system.
  • Use hydrid drive for clamping, clamping strong.
  • Use PID constant control heating unit of the wind motor.
  • Touch scree human-machine interface for easy operation.
  • Modular component design for easy maintenance.
  • Use module type of the high pressure blowing valve combinedwith air recycling system, saving energy and protecingtheenvironment.

Structure diagram

Machine Specification

You can swipe left or right to view the complete parameters, or you can click
Model Unit AOK-5L AOK-10L AOK-20L AOK-30L KEG
Clamping System Number of cavity Cavities 2 2 1 1
Calmping unit Kg 48000 52000 65000 6500
Mold stroke mm 200 240 300 300
Stretch stroke mm 360 320 400 400
Bottom stroke mm 50 50 50 50
Cavity distance mm 200 200 300 320
Heating distance mm 75 75 75 75
Number of holder Pcs 66 66 70 70
Container Max.container volume ltr 5 10 20 30
Max. neck diameter (optional) mm 45 55 72 80
Max.prefrom height mm 140 250 250 250
Max.container diameter mm 180 210 250 430
Max.container height mm 360 430 430 310
theoretical output B.P.H 1200 900 500 200
Electrical System Heating oven Units 2 3 4*4 4
Box*channel 2*12 13*12 4*17 4*17
Number of lamp Pcs 24 72 68 68
Heating power kw 48 78 81 81
Installed power kw 56 50 92 92
Voltage V 220/380V/3phase
Air System Operating pressure kg/cm² 7
Blowing pressure Mpa 3.5
High pressure air consuming L/min 3600 5000 5000 5000
power Kw 32 44 44 44
Chiller System Temperature ℃ 10-15
Pressure Mpa 0.4 0.4 0.3-0.5 0.3-0.5
Flow rate L/min 90 200 250 250
Heating power HP 5 5 5 5
Machine Machine dimension (L*W*H) m 3.5*2.0*2.0 4.8*2.0*2.0 5.6*2.9*2.2 5.6*2.9*2.2
Machine weight Kg 4500 6500 7000 7000